Industrial machine installation service - DML Vietnam

Vietnam is one of the countries with a growing industrialization. Aiming to be a strong industrial country by 2030, this is a huge opportunity for investors to invest in production. DML Vietnam is an industrial machine and machine installation contractor with many years of experience installing machines and having gone through level 1 projects. We consider Vietnam to be the most potential machine installation market. Below is our industrial machine installation service

Definition of industrial machine installation service

This is a service in which DML had to closely combine people, lifting machinery, jacking tools and many types of pads to create a unified job to help lift goods and install equipment. Machine parts together, installed and operated until industrial machinery can produce finished products.

The process of installing industrial machines is described in the following steps

* Step 1: Find out the machine installation site - The machine installation site must be agreed from the beginning, with drawings, fully showing the installation location, type of machine to be installed, entrance and exit to the factory and height of the machine. auxiliary equipment.

*Step 2: Calculate and prepare construction measures - After obtaining the factory's parameters, DML's engineers will create a construction method that includes the working process, the type of lifting equipment needed, the type of machinery to assist in dismantling and opening, and the tools to support the project. lining, hand tools. In addition, it shows the work progress to explain to customers all the work that DML will perform for their machine.

Step 3: Perform machine installation - Once the progress and tools have been agreed upon, the DML contractor will install the machine and during the implementation process will ensure factors related to safety, accuracy, safe lifting and installation. Set the schedule committed to the factory.

Step 4: Conduct post-installation acceptance test - After complete installation, machines will be evaluated by the factory or a third party for quality. Quality will be evaluated through the production of goods and the stability of the equipment when operating. Usually, DML Vietnam's machine installation packages include a 12-month warranty for the entire system.

What systems do an industrial machine usually need to install?

* Power system for the machine - The power source will be connected by DML engineers from the main cabinet and then divided to the machine's sub-cabinet and then into the machine. In the system, there will be warning lights, short circuit protection system, lightning protection system and systems that automatically turn on and off power when there is an incident.

* Control electrical system - Control electrical system will be connected from machine parts to the main body and to the control CPU, where sensors, mortors, safety systems, and balancing systems are all controlled. electrical control and through a large CPU to control the production machine according to the inventor's wishes.

* Installing water supply pipes and air supply pipes - Yes, some industrial machines need water for cooling, so water pipes are important and need to be constructed right after installing the machine. In fact, up to 90% of industrial machines use high pressure air to run, clean, cool, etc., so high pressure air pipes will also be connected right from the beginning.

* Installing fuel pipes - Industrial machines can also use gas, gasoline, diesel fuel systems, etc., so these pipes also need to be installed and it is related to the safety of the whole unit. a factory, so the engineers who install this DML system must have over 10 years of experience to be allowed to construct.

* Installing hood systems, installing air ducts - These systems ensure the removal of odors, smoke, and dust from industrial machines and at the same time bring fresh air containing lots of oxygen to serve the workers at the factory.

DML Vietnam's industrial machine installation capacity

* The contractor has the most forklifts and cranes - That's right, with more than 100 forklifts and 50 cranes of all types, we realized early on that these equipment are really necessary to install industrial machines. Therefore, it was invested very early and has been completely depreciated, so now the unit price of these devices is extremely cheap.

* Is the unit with the most engineers - With 200 engineers graduating from leading engineering universities. Every year, DML Vietnam's engineers are trained in advanced countries such as Japan, Germany, America, etc., so when it comes to technical quality, we guarantee that you cannot find another unit which is equivalent.

* Participated in many large projects - DML engineers have participated in large construction projects such as Nghi Son oil refinery, Long Son oil refinery, Wind power installation at Quang Binh BT.... These are all Level 1 project and awarded many international certificates.